YO99-0874-DI-002-18
17
2.8 Setting of Motor Controller (Atmospheric Pressure Actuating
Type.With the inverter. )
Please refer to Section 5.4.
WARNING
①
For the operation of the controller and electrical wiring,
refer to the instruction manual for the inverter.
②
Troubles imputable to control by other than the standard controller
and to change of setting are not covered by this warranty.
Do not change the factory setting and starting control wiring.
③
When starting the pump by remote operation, however, disconnect
the control wiring for the start-up and turn ON/OFF the mechanical
no-voltage contact to start/stop.
④
When you use the atmospheric actuation specification, in the control
equipment used in the PMB-D series, an appropriate setting for each
pump operation is performed. If you examine the special use method
(When changing the parameter of the control equipment), consult with
our company.
Furthermore, this pump guarantees reliability by the operation
frequency
50Hz
～
60Hz.
Summary of Contents for PRC-003A
