YO99-0874-DI-002-18
18
3. Mounting
3.1 Storage/ Installation
Install the machine horizontal to a place where there are less dust and humidity. Make a layout taking
into consideration of works such as setting, removal, check, cleaning and so on.
Refer to “0.5 Acceptance and Storage of The Pump” as for the detail.
3.2 Installation
Put the Pump on the frame mount and fix four fixing holes on the base with the bolts.
You are requested to install and operate the product in compliance with the
laws and regulations relating to the safety, e.g. Fire Defense Law, Electric
wiring regulation and so on in the country and region you use the product.
Consequently you shall be requested to attend general safety lectures
officially effective in the area, such as electrical safety, Cargo handling safety
and so on. Note that any person not attended such lectures shall be
restricted from handling the product. Operators shall need to attend such
kind of training and have special knowledge, skill and title regarding the
electricity, machinery, cargo, vacuum and so on.
Be sure to clear any energy sources, e.g. electricity, coolant and so on of the
product before installing or removing the product.
WARNING
Operating the pump on laying it down or putting it reverse would give damage
to the pump. Ensure to install the pump horizontal to the ground level as
illustrated on the Fig. 3
～
6.
Be careful not to tilt the unit 10°or more.
CAUTION
The frame mount might cause the Pump vibration and/or resonance,
incidentally remarkably depending upon its shape. In such a case use the
anti-vibration rubber insulator to fix the unit rather than to fix it directly with
bolts or the like.
CAUTION
Summary of Contents for PRC-003A
