background image

YO99-0874-DI-002-18 

0. Before Using This Product 

We thank you very much for purchasing our product. 

You are kindly requested, upon delivery of the product, to check that the delivered product is exactly what 

you have ordered and it has no damage caused by transport or the like. 

This manual gives description on operation and maintenance procedure appropriate to use the product in 

safe and effective way. Please read this manual beforehand to correctly use the Pump. 

 

You are requested to install and operate the product in compliance with the laws and regulations relating to 

the safety, e.g. Fire Defense Law, Electric wiring regulation and so on in the country and region you use the 

product.  Consequently  you  shall  be  requested  to  attend  general  safety  lectures  officially  effective  in  the 

area, such as electrical safety, Cargo handling safety and so on. Note that any person not attended such 

lectures shall be restricted from handling the product. Operators shall need to attend such kind of training 

and have special knowledge, skill and title regarding the electricity, machinery, cargo, vacuum and so on. 

 

This  product  is  designed  to  conform  to  regulations  valid  at  the  time  of  issue  of  this  manual  and  its 

conformity is not ensured if any of regulations shall be changed in the future. 

The performance and safety of the product might not be ensured if any of the devices put together did not 

conform  to  same  regulations  or  the  product  itself  was  modified.  ULVAC  shall  be  not  liable  to  guarantee 

performance  and  safety  in  such  cases  above.  Any  modification  of  the  product  by  the  user  is  out  of  the 

scope of guarantee by us and not be guaranteed in any manner. 

Be sure to clear any energy sources, e.g. electricity, coolant and so on of the product before installing or 

removing the product. 

 

Please note that any of the parts used in this product shall keep the performance at the time of the shipment 

but  shall  not  survive  eternally.  Any  of  the  parts  cannot,  under  any  application  supposed  under 

socially-accepted  idea,  help  but  inevitably  deteriorate  its  performance  and  get  easily  result  in  causing 

trouble  of  the  product.  You  are  kindly  requested  consequently  to  take  your  application  situation  into 

consideration and help yourself to implement the protective maintenance so as to avoid troubles.   

Through implementation of the protective maintenance, you shall reduce occurrence of the trouble due to 

wear and/or failure of the part and bring reducing the occurrence of the downtime caused by the product 

trouble and fire as well as a risk of affecting the another process. 

Please do not hesitate to contact our sales office or agency closest to you or the Components Division if 

you had any question or unclear on the use. 

 

 

 

 

Summary of Contents for PRC-003A













































































Reviews: