Ulvac PRC-003A, Instruction Manual

Page: 12 / 76

YO99-0874-DI-002-18
xi
0.5.2 Transfer
0.5.3 Ambient Condition for Storage, Install and Operation
As precise clearances are provided with this machine, be sure to fulfill the following for its storage,
install and operation;
(1) Ambient temperature and humidity for storage : -30°C to 60°C, less than 95%RH
(2) Ambient temperature and humidity for operation : 10°C to 40°C, less than 80%RH
(3) Height (for both storage and operation) : Lower than el. 1,000m.
(4) External vibration (for both storage and operation) : Vibration acceleration less than114dB
(0.5G)
(5) Miscellaneous (for both storage and operation) :
a. There shall be no corrosion behavior or explosive gas.
b. There shall be no freeze or dew formation.
c. There shall be no dust.
d. It shall be in house.
e. Another pump shall not be put on the Pump.
f. The Pump shall not be laid down nor put touching its motor edge face or oil gauge edge face
with the ground.
g. There shall be no direct sun beam.
h. Heat source shall be put away from the Pump.
Fix the Pump on tightening bolts the mount to install it. Be sure to use the anti-vibration rubber bumper
so as to insulate the mount.
Do not give the Pump a shock or lay it down. It might impair the Pump
operation.
CAUTION
You have a risk of giving damage to your back as the load larger than safety
standard shall be required to transfer the product.
Be sure to use the loading machinery (such as mobile crane) to lift up the
Pump or load it on the pallet and fix it with Jack and run the Pallet truck for its
transfer.
WARNING