YO99-0874-DI-002-18
50
7. Removal / transport
7.1 Operation procedure
(1)
Stop the Pump operation and replace the gas completely with the nitrogen gas (to be required
only in the case used any special gas).
(2)
Shut the electricity supply and remove the cable connection.
(3)
Remove the Cooling water piping.
(4)
Take off the Drain plug on the Gear cover and discharge the lubrication oil. Transport keeping
the oil inside might cause the oil flow back in the casing if tilted the unit.
(5)
Remove the Suction/exhaust piping and put Blind flanges to the Pump inlet and outlet to seal
them up.
You should replace with the nitrogen gas completely the Pump that exhausted
any special gas.
Note further that only the entitled person for special gas handling should be in
charge of the removal work.
Keep applying a plate displaying the name of exhausted gas on a place easily
seen on the Pump.
DANGER
You have a risk of giving damage to your back as the load larger than safety
standard shall be required to transfer the product.
Be sure to use the loading machinery (such as mobile crane) to lift up the
Pump or load it on the pallet and fix it with Jack and run the Pallet truck for its
transfer.
Never try to enter beneath the Pump unit when lifted it up.
Use the accessory eyebolt to load/unload the unit.
Do not put the folk of the Fork lift or the like in the Pump bottom (exhaust
outlet) to lift it.
WARNING
Summary of Contents for PRC-003A
