YO99-0874-DI-002-18
14
2.5.3 Power consumption
If the intake pressure exceeds the maximum intake pressure (refer to “Table. 3 Performance
specifications”) when the standard fore pump is used, the motor will be under overload and the pump
will be overheated, leading to burnt motor or seized pump. Use a fore pump with which the difference
in intake pressure between the mechanical booster pump and the fore pump is smaller than the
maximum permissible difference pressure (pump having a higher performance than the standard fore
pump in terms of pumping speed and ultimate pressure.
Since the performance of the mechanical booster pump largely depends on the performance of the fore
pump as described above, use care in selecting the fore pump.
The basic performance curve for this pump using the standard fore pump is shown on the next page.
Summary of Contents for PRC-003A
