YO99-0874-DI-002-18
xii
0.6 Protective Device
This machine is equipped with the Three-phase AC200V 50/60Hz, AC220V 60Hz motor.
This motor is not equipped with the protective device. Put an overload protective device to connect
through the motor with the Power Supply. It is imperative to put the overload protective device under
direction of the Electrical Installation Technical Standard (1965, Department of Trade and Industry decree
No. 61). Refer to “3.6 Electric connection” to select the overload protective device. It is recommended to
put together another protective device such as a leakage breaker.
Be sure to put an overload protective device. Otherwise it would cause a burn
out and/or fire of the motor.
CAUTION
Summary of Contents for PRC-003A
