Ulead MEDIASTUDIO PRO 6 User Manual Download Page 334

Page: 334 / 360

MEDIASTUDIO PRO USER GUIDE

334

The chapter in review

Here are some key points and tips to remember from this chapter:

• Click the Mark In/Out button to start and end a selection when playing

a file (p.318).

• Use the Sample information window for creating precise selections

(p.319).

• Use cues to mark events in a waveform (p.319).

• Click the Edit: Mute command to remove areas without affecting the

duration of a waveform (p.321).

• Normalize a waveform before changing its amplification (p.323).

• Quantize a waveform to decrease its file size while retaining audible

quality (p.325).

• Select a 2-5% threshold for removing noise (p.326).

• Use the Effect: Invert command to remove a previously mixed file

(p.328).

Summary of Contents for MEDIASTUDIO PRO 6









































































































































































































































































































































































Search results

Summary of Contents for MEDIASTUDIO PRO 6

Reviews:

Related manuals for MEDIASTUDIO PRO 6

Brands by name

Popular brands

Ulead MEDIASTUDIO PRO 6, User Manual

Search results

Summary of Contents for MEDIASTUDIO PRO 6

Reviews:

Related manuals for MEDIASTUDIO PRO 6

Brands by name

Popular brands