Ulead MEDIASTUDIO PRO 6, User Manual

Page: 151 / 360

VIDEO EDITOR: CHAPTER TWO 151
1. Play (Pause) plays the entire clip from beginning to end.
2. Play Mark Area (Pause) plays only the trim area from Mark-in to Mark-out point.
3. Play from the current position to Mark Out (Pause) plays the clip from the
current position of the Jog bar to the Mark Out point.
4. Previous Edit Point moves the Jog bar to the previous cue or the beginning of
the clip.
5. Previous Frame moves the Jog bar to the previous frame.
6. Next Frame allows you to maneuver the Jog bar one frame at a time.
7. Next Edit Point moves the Jog bar to the previous or next cue or the end of the
clip.
8. Repeat plays the active clip continuously.
9. Mark In and Mark Out position the Trim Handles at the current location of the
Jog bar and adjust the Trim Area.
Trimming clips in the Source window
The Source window allows you to visually trim any part of an audio or
video clip and then update the clip automatically on the Timeline.
To trim a video clip:
1.
Locate the first frame that you want to include in your clip and position
the Mark In trim handle (on the left)
at this point. The red line between
the two trim handles represents the trim area. The actual duration of the
trim area is shown on the lower of the two timecode displays.
2.
Position the Mark Out trim handle (on the right) at the last frame you
want included in your trimmed clip.
3. Click the Apply button on the lower right.
1
3 4 5 6 7 8
9
2
SOURCE WINDOW NAVIGATION BAR