Document No: LT0255
F3200/NDU AS4428.1 Installation Manual
System Specifications
Issue 1.22
5 July 2016
Page 3-21
3.7
DISPLAYS
Standard Display
Includes
:
LCD; FF LEDs; System Status LEDs
Panel Size
:
19", 4U
LCD Size
:
2 Lines of 40 characters, 5.5mm (H) x 3.2mm (W) per character
Site Name
:
40 Characters max.
Zone Name
:
30 Characters max.
Relay Name :
30 Characters max.
FF LEDs
:
ALARM (red); ISOLATED (yellow); FAULT (yellow); EXTERNAL
BELL ISOLATE (yellow); WARNING SYSTEM ISOLATE (yellow)
System
Status LEDs :
MAINS ON (green); CHGR/BATT FAULT (yellow); SYSTEM FAULT
(yellow); AIF ATTENDED (yellow)
Internal
:
Mains On (green), Fuse Blown (yellow) on MAF/PSU PCB.
Status LEDs
Optional Additional LED Display, 16 Zone (3 LEDs/Zone)
Requires 1 x ME0060 plus 1 x FZ3031 plus 1-3 x FP0475 as required.
ME0060 MECH ASSY, 1901-79, F4000 RAC, EXT INNER DOOR
(19", 7U, mounts up to 4 of 16 LED Display Bd)
FZ3031 KIT, F3200, 16 ZONE LED DISPLAY, LHS POSITION
FP0475 FP, F4000 DISPLAY EXTENDER KIT, 1901-26
Includes
:
1 x 16 LED Display Bd (16 zone parallel LED display); FRC; Power
leads; zone name label.
Format
:
7U Parallel LED display mounts directly below the standard 4U LCD.
Zone LEDs
:
ALARM (red); FAULT (yellow); ISOLATED (yellow)
Name Space :
10mm x 60mm per zone on paper label.
E.g. 2 lines of 23 characters at 10 per inch.
Optional Additional LED Display, 16 Zone (2 LEDs/Zone)
Requires 1 x ME0457 plus 1-5 x FP1002 as required.
ME0457 MECH ASSY 1982-40 MX1 4U 5 X 16 ZONE DISPLAY DOOR
(4U module mounts 5 x FP1002 to give 80 zones of LEDs).
Format
:
2 LEDs per zone, Red = ALARM, Amber = FAULT (flashing); Isolate
(steady).
Name Space :
9 x 44mm per zone on paper label (LT0369).
New Zealand Mode Display Extender Board (applicable to NDU only)
Status LEDs: NORMAL (green), DEFECT (yellow), FIRE (Red)
PA0499 PCB ASSY,1901-119-1,F4000 NZ DISPLAY EXTENDER
