Tyco Fire Protection Products F3200, Installation & Configuration Manual

Page: 4 / 148

F3200/NDU AS4428.1 Installation Manual Document No: LT0255
Page iv
5 July 2016 Issue 1.22
CHAPTER 7 ALIGNMENT, ADJUSTMENT & PLACING INTO OPERATION .......7-1
7.1 ALIGNMENT & ADJUSTMENT ............................................................................................. 7-2
7.2 PLACING INTO OPERATION ............................................................................................... 7-3
7.3 ERROR MESSAGES FOR STARTUP .................................................................................. 7-7
APPENDIX A COMPATIBLE ACTUATING DEVICES (DETECTORS) .......................A-1
AMENDMENTS
ISSUE DATE COMMENTS ECN
1.0 07/02/01 Original. Split from LT0122 and modified for AS4428.1
1.01 02/07/01 Pages 5-20, 6-21, 6-23, 6-25 and Appendices A-1, A-2
revised. 3190
1.02 15/08/01 Chapter 5 Installation revised and Section 6.2 Gas Flood
revised. Added section 5.12, section 3.3.5.2. 3154
1.04 30/06/04 Preface, Pages 5-6, 5-15, 5-16, 5-19, Section 6.2 and
Appendix A revised 3322
1.05 01/03/05 Appendix A
– added 614CH, 614I & 614P
3635
1.06 28/10/05 Appendix A
– added System Sensor detector 885WP-B
ECS
1181
1.07 24/03/06 Section 5.6.2 and 5.6.3 added.
Appendix A
– added 614T heat detector.
3731
1.08 28/03/07 Section 6.1 amended.
1.10 24/07/09 Updated for V5.xx. 3995
1.20 18-Jan-13 MAF relay rating, S231+ connection revised, HF actuator
connection added.
4443
1.21 09/02/15 AZC specification altered for changed transistor.
Added 5.13 for IP Networking. 4564
1.22 05/07/16 Added RCM details. Revised PSU current down from
3A/6A. 4925