Triumph Adler P-C3570DN User Manual Download

Page: 76 / 255

Using the Operation Panel

4-3

Understanding the Operation Panel

The operation panel on the top of the printer has a 5-line by 21-character
liquid crystal display (LCD), ten keys, and three indicators (LED).

Messages that appear on the display and functions of indicators and keys
are explained in this chapter.

Message Display

The message display on the operation panel shows:

• Status information, the ten messages listed below which are displayed

during normal operation.

• For information on error code and errors where the printer requires

the operator's attention, refer to

Troubleshooting on page 6-1

Summary of Contents for P-C3570DN
































































































































































































































































Search results

Summary of Contents for P-C3570DN

Reviews:

Related manuals for P-C3570DN

Brands by name

Popular brands

Triumph Adler P-C3570DN, User Manual

Search results

Summary of Contents for P-C3570DN

Reviews:

Related manuals for P-C3570DN

Brands by name

Popular brands