Model Two & Model Two Lite - Operation Manual
73
Limit Test
- This data record is listed with the number of channels failed for individual Channel
Test parameters displayed at the top of the screen. Use
F2
or
F3
to scroll to any channel to
see the Video level and Pass (checkmark) or Fail (X) indication.
Tilt Test
- This data record is listed with the Tilt Level displayed at the top of the screen. Use
F2
or
F3
to scroll to any Tilt/Favorite channel to see the Video level.
Spectrum Test
- This data record lists the frequency and signal level for each data point in the
Spectrum test. Use
F2
or
F3
to scroll to any listed frequency in the Spectrum scan.
Scan test
- This data record lists all Video and (first) Audio levels for each channel in the Scan
test. Use
F2
or
F3
to scroll to any channel.
Level Test
- This data record lists all Video and (first) Audio levels for each channel in the
Level test. Use
F2
or
F3
to scroll to any channel.
TIP:
On any listed record, you can use the
UP
and
DOWN
arrow keys to scroll through the
channel list (data points for Spectrum test) by one page (8 channels) at a time.
While displaying a list of any data record, you can press
F1
(BACK) to return to the FILE
CONTENT screen.
Note:
The Pass or Fail indication for the Limit Test is based on the Limit
Test parameter setup at the time the Limit Test was performed. A digital
(DIGI) type Channel Measurement during the Limit Test is shown but is
not used to determine Pass or Fail for any of the tests.
Note:
If DUAL Audio channels are used, only the first Audio level is listed
for Scan and Level Tests. Both Audio levels are displayed on printouts or
uploads to a PC.
