Model Two & Model Two Lite - Operation Manual
38
5.
Basic Operation
5
Once you have set up the Model Two’s parameters, you are ready to operate the unit.
There are a number of tests you can perform with the Model Two:
•
Single channel level tests
•
Frequency mode
•
Channel spectrum scans
•
Limit tests
•
Frequency spectrum scanning
•
Carrier-to-noise
•
Tilt and favorite channel levels
•
Battery and trunk voltage
Fast Setup
The Model Two features a Fast Setup function for each measurement mode (except Carrier-to-
noise and Voltage that do not require setup). The specific setup menu for each mode can be
accessed directly by pressing the
SET
key once while in the Measurement mode. This makes it
unnecessary to go back to the main Setup menu and look for nested submenus. This allows the
operator to quickly make changes in the settings and return to Measurement mode with no wasted
time.
Note:
The Model Two displays readings down to -50 dBmV (+10 dB
μ
V).
All signal levels that are below -30 dBmV (+30 dB
μ
V) are displayed with
lighter shade digits in all measurement modes to indicate they are low
signal levels.
Note:
Pressing the
SET
key twice always displays the main Setup
menu.
