Model Two & Model Two Lite - Operation Manual
36
Deleting a Channel:
A channel may be entirely deleted while in the Edit User Plan list of
channels by pressing the
DOWN
arrow key. If a channel is deleted, it will not be available to
enable later, and it will not be scanned in the full spectrum scan mode. It is recommended that
a channel be disabled instead of deleted from the plan.
When you have completed your changes to all channels that require edit in the User Plan,
press
SET
to save the modifications and return to the main Setup menu.
Tilt/Level List
This feature lets you select up to twelve favorite channels. These channels are also used when
making the Tilt measurement.
Press
F1
(ENTER) from the Tilt/Level List selection on the Channel Plan Setup menu to enter
the Tilt Setup screen.
Note:
You must select at least four channels to make the Tilt
Measurement. The Model Two uses the highest and lowest frequencies
when making the measurement.
CAUTION:
All edits are temporarily stored until you exit the Edit User
Plan screen. Do not turn off the Model Two before exiting the Edit User
Plan screen, or the changes will not be saved.
To add a channel to the Favorites list, use
F2
and
F3
to scroll the list of channels in the
selected User Plan. When the desired channel is highlighted, press
F1
. A check mark appears
next to the channel under the Tilt column, and the channel number is placed in the Favorites
column at the bottom of the display. As you add channels, the Favorites list arranges them in
order of their frequency. For example, even if you selected Channel 14 first, as you add
Channels 4 and 6, these channels go to the top of the list.
TIP:
Use the
UP
and
DOWN
arrow keys to scroll through the User Plan list one page (6
channels) at a time.
