Model Two & Model Two Lite - Operation Manual
66
When the parameters for all selected tests have been verified or changed, press
F2
(NEXT) to
continue. The Auto Test screen for STEP 4 appears.
If you wish this Auto Test program to perform its test sequence only once each time it is
started, you can press
F1
(START) to immediately begin execution of the testing program. If
F1
is selected to start the program, the Model Two performs the selected tests and then shuts
off.
A file containing all test records is created and automatically saved. The filename is the Auto
Test program name followed by an asterisk (*) to indicate that it is a single Auto Test file. This
is displayed in the Model Two file directory along with the date and time. (See
File Saving,
Viewing, and Printing
later in this chapter.)
If you wish to save the Auto Test program for later use without running the entire program now,
you can start the test and then press
F1
to exit.
Note:
A new Auto Test program that is started as a single test sequence
(no 24 HR test) has default settings for 24 HR operation (6 Hours, 5
Tests) stored with the program. When this program is executed again, it
can run as a single test sequence or as a 24 HR test with the default
settings.
