Model Two & Model Two Lite - Operation Manual
35
Measure BW
–-Press
FCN
to switch to Numeric Entry mode and enter the measurement
bandwidth for this channel. Press
F1
(ENTER) to store the change. (This parameter appears
for DIGI and SIGL types only.)
Aud1 Offset—
Press
FCN
to switch to Numeric Entry mode and enter the positive offset of the
first audio frequency from the video carrier. Press
F1
(ENTER) to store the change. (This
parameter appears for DUAL type only).
Aud2 Offset—
Press
FCN
to switch to Numeric Entry mode and enter the positive offset of the
second audio frequency from the video carrier. Press
F1
(ENTER) to store the change. (This
parameter appears for DUAL type only).
When you are satisfied with your entries, highlight SAVE AND EXIT and press
F1
(ENTER) to
return to the Edit User Plan screen.
Adding a Channel:
A channel may be added while in the Edit User Plan list of channels by
pressing the
UP
arrow key. A Channel Edit screen appears for the new channel with the next
available channel number assigned. This channel number may be changed, but an existing
number in the plan (enabled or not) may not be used. Other parameters on the new Channel
Edit screen should be set, including frequency, which has a default setting of 5 MHz. When
finished, select SAVE AND EXIT and press
F1
(ENTER) to return to the Edit User Plan
screen.
All channels, including a new channel, appear in the Channel Plan according to frequency—not
channel number.
Note:
The sum of ½ of this bandwidth and the center frequency should
never be more that 870 MHz.
Note:
The sum of this second offset and the video carrier frequency
should never be more that 870 MHz.
