Model Two & Model Two Lite - Operation Manual
63
Level Parameters
Use the
UP
and
DOWN
arrow keys to highlight any channel in the selected user plan, then
press
F1
(ENTER) to enable or disable the channel for the Level Test. An enabled channel
displays a checkmark next to it.
When all desired channels are enabled, press
F3
(BACK) to return to the Auto Test screen for
STEP 3.
Spectrum Parameters
Press
F1
(ENTER) to change the highlighted Spectrum test bandwidth to 2.50 MHz, 6.25 MHz,
12.50 MHz, 25.00 MHz, 62.50 MHz, or a full-spectrum scan of the User Plan Base Channel
Plan.
Use the
UP
and
DOWN
arrow keys to highlight the center frequency selection for the Spectrum
test. Press the
FCN
key, enter the center frequency numerically in MHz, and press
F1
(ENTER). This parameter is not used if the full-span bandwidth is selected.
When the desired frequency and bandwidth have been set, press
F3
(BACK) to return to the
Auto Test screen for STEP 3.
Note:
There are no default channels enabled for the Level Test
parameter. If Level Test is selected for the Auto Test program, you must
enable one or more channels.
