manualshive.com logo in svg

Trilithic Two, Operation Manual

Share
Download
Trilithic Two Operation Manual Download Page 40

Model Two & Model Two Lite - Operation Manual

40

For example, to change the display graph from a 10 dB scale to a 5 dB scale, press 

F1

 three

times to cycle through the steps.

You may also change the reference level of the graph. Press 

F2 

(REF) and then press the 

UP

and 

DOWN

 arrow keys

 

to increase or decrease the reference by one digit at a time.

Press 

F3

 (UP) to return to the original Level screen so that the functions of softkeys 

F1

 and 

F2

become 

FREQ

 and 

MAX

.

The Model Two digital readout can be set to display a LIVE, MAX, or 

Δ

 P-P signal level as an

aid to troubleshooting. Press softkey 

F2

 to select the desired display mode as described

below:

•

LIVE

 is the normal operating mode whereby the digital display indicates the current

value of the input signal.

•

In the 

MAX

 mode, the digital display indicates the maximum level of the input signal. In

this mode, an “

M

” is displayed after the digital reading.

•

In the 

Δ

 P-P

 mode, the digital display indicates the variation in the input signal level. In

this mode, a “

Δ

” is displayed after the digital reading.

Note:

 The amplitude of the graph changes as you change the scale and

reference so that it continues to indicate the correct level. You must press

F3

 (UP) to return to the original Level screen for the 

UP

 and 

DOWN

arrow keys

 

to change channels (instead of reference) again.

Summary of Contents for Two





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands