manualshive.com logo in svg

Trilithic Two, Operation Manual

Share
Download
Trilithic Two Operation Manual Download Page 69

Model Two & Model Two Lite - Operation Manual

69

If you wish to save the Auto Test program for later use without running the entire program now,
you can start the test and then press 

F1 

to exit.

The new Auto Test program is added to the Auto Test directory with the program name entered
in Step 1.

Up to 7 Auto Test programs may be created and saved. From the Auto Test directory, a
program may be deleted by using the 

UP

 and 

DOWN

 arrow keys to highlight the program

name and pressing 

F2

 (DEL).

Also, information about an existing file may be obtained by using the 

UP

 and 

DOWN

 arrow

keys to highlight the program name and pressing 

F3

 (INFO).

Parameters for each test may be viewed by using the 

UP

 and 

DOWN

 arrow keys to highlight

the test and pressing 

F1

 (ENTER) to view the setup parameters. Also, the status of the 24 HR

setup can be seen by pressing 

F2

 to view the Test Times and Time Intervals.

Summary of Contents for Two





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands