manualshive.com logo in svg

Trilithic Two, Operation Manual

Share
Download
Trilithic Two Operation Manual Download Page 49

Model Two & Model Two Lite - Operation Manual

49

When the Limit Test is complete, a Test Result summary screen appears to indicate the Pass or
Fail status for each test parameter. Each test that has passed has a checkmark next to that
parameter. Each test that has failed has an X next to that parameter.

The Maximum 

Δ 

Video and Maximum 

Δ

 Adjacent channel status are determined by the results of

the overall channel plan measurements. Press 

F2

 or 

F3

 to view the Minimum and Maximum Video

channels and levels. Also, if a failure has occurred for the Maximum 

Δ

 Adjacent channel test, the

adjacent channels with the greatest variation are listed.

The Minimum Video, Maximum Video, Minimum 

Δ

 V/A, and Maximum 

Δ

 V/A are tested for all

channels in the User Plan. If any channel fails one of these tests, the Test Result summary
indicates a failure (X) for that test. If all channels pass one of these tests, the Test Result summary
indicates a pass (checkmark) for that test.

Note:

 A digital (DIGI) type channel is measured during the Limit Test but

is not used to determine Pass or Fail for any of the tests.

Summary of Contents for Two





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands