manualshive.com logo in svg

Trilithic Two, Operation Manual

Share
Download
Trilithic Two Operation Manual Download Page 22

Model Two & Model Two Lite - Operation Manual

22

Information

The Information display windows contain useful information regarding your Model Two.

The first screen of information shows the unit’s serial number, firmware and hardware version, and
the company’s Web address. You can use the 

F2 

and 

F3 

keys to scroll through other information

screens to see more information about the Model Two, including user settings. Press 

F1

(ESCAPE) to return to the main Setup menu.

General

Use the General menu screen to set the operational parameters of your unit.

Use 

F2 

and 

F3 

to scroll through the command choices to the desired parameter.

Backlight

This selection determines the backlighting time on the Model Two display. Press 

F1 

(or use

the 

UP 

and 

DOWN 

arrow keys) to change the backlighting time. The selected time is

displayed in the window near the bottom of the display screen. You can select 

ON

(backlighting is always on), 

OFF 

(backlighting is always off), or 

3, 5, 10

, or 

30 

minutes

(activates the backlight for the selected number of minutes, then turns it off to save power).

Summary of Contents for Two





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands