Model Two & Model Two Lite - Operation Manual
64
Limit Parameters
The status of all Limit Test parameters are displayed (except the 24 HR Deviation limit
parameter for 24 HR tests). The enabled limits for testing are also indicated by a checkmark. If
the current settings are acceptable, you can press
F3
(BACK) to return to the Auto Test screen
for STEP 3.
If you wish to change or (disable) any Limit parameter, you can press
F1
(ENTER) to display
the Edit Limits screen. All Limit parameters may be changed as described in Model Two
Setup for the Edit Limits display. (See
Limit Setup
on Page 29.) When the desired changes
have been made in the Edit Limits screen, select SAVE AND EXIT to return to the Auto Test
Limit Parameter screen.
If the settings displayed on the Limit Parameter screen are correct, press
F3
(BACK) to return
to the Auto Test screen for STEP 3.
