Model Two & Model Two Lite - Operation Manual
60
Auto Test
The Model Two can accept user-defined testing programs to automatically perform Level,
Spectrum, Tilt (Favorite), and Limit tests in specified time increments. The Model Two can store
up to 7 user programs for recall when needed. The test results are stored to a file automatically
and may be printed automatically after measurement or they can be viewed, printed, or uploaded
to a PC later.
If you wish to have Auto Test measurements printed automatically after each test time sequence,
you must have the AUTO TEST PRINT feature enabled in the Print Setup menu. Also, you must
have the printer connected and the correct printer selected in Printer Setup.
TIP:
With Fast Setup, you can access the Print Setup menu directly from Auto Test by pressing
SET
once.
To set up an Auto Test, press
AUTO
. The Auto Test program directory appears.
If existing programs are listed, press the Down arrow key until a blank selection is highlighted.
If the directory has no programs, the blank selection appears automatically.
