Model Two & Model Two Lite - Operation Manual
25
Print Setup
This selection lets you set up and display printing options.
To select or deselect an option from the Print Setup menu, use
F2
or
F3
to scroll to the option,
then press
F1
. A checkmark appears beside each selected option.
PRINT ALL
- When this option is selected and multiple tests (Level, Scan, Spectrum, Tilt, or
Limit) are stored in one file, all test reports in that file are printed. When this option is not
selected, only the selected test in the file is printed, regardless of the number of tests stored in
the file.
AUTO TEST PRINT
- When this option is selected, the Model Two prints automatically after
each Auto Test is performed. (Be sure to have a printer connected before starting the Auto
Test.) When this option is not selected, automatic printing does not occur after each test. You
can select and print the file at your discretion after testing.
PRINTER SETUP
- Press
F1
to display the list of printers that may be used. (A checkmark
appears beside the selected printer.) You can change the selected printer by using
F2
or
F3
to
scroll through the list, then press
F1
. The Model Two returns to the Print Setup menu.
PRIOR MENU
- Press
F1
to return to the previous menu.
