Model Two & Model Two Lite - Operation Manual
29
Limit Setup
Press
F1
to enter the Setup menu. Use this menu to set Scan parameters, including test limits.
To select an item from the Scan Setup menu, use
F2
or
F3
to scroll to the selection.
DISPLAY LIMITS
- Press
F1,
or press the
UP
or
DOWN
arrow keys to select or deselect
viewable Limits in Scan mode. When Display Limits is activated, the test limit settings for
Minimum Video and Maximum Video can be seen on the display during channel scanning.
(See
Channel Spectrum Scanning
on Page
46
.)
EDIT LIMITS
- Press
F1
to enter the Edit Limits menu. All parameters used in a Limit test may
be set in this menu. (See
Limit Testing
on Page 48.)
Use
F2
or
F3
to scroll to each limit parameter.
