manualshive.com logo in svg

Trilithic Two, Operation Manual

Share
Download
Trilithic Two Operation Manual Download Page 51

Model Two & Model Two Lite - Operation Manual

51

Frequency Spectrum Scanning

The Model Two can be set to display spectrum measurements with spans ranging from 2.5 to 62.5
MHz. It can also be set for a full spectrum scan of the base channel plan with sampling at each
video carrier frequency.

TIP:

 While in the Spectrum mode, you can use Fast Setup (Press 

SET

 once) to go directly to

the Measurement Setup parameters including Transmission.

For further information on Transmission operation, see 

Transmission Characteristic Test

 on

Page 56.

The following information is for normal (absolute) spectrum scanning.

To enter the Frequency Spectrum Scanning screen, press 

SPECT

.

When the Full Spectrum scan is displayed, the Span indicator (SP) is displayed as PLAN_A-E
(full span of selected user base plan). The starting frequency (ST) is shown along with the marker
frequency and level.

Note:

 TRANSMISSION mode is set up in the Measurement menu. Since

the following data is for normal (absolute) spectrum scanning,
TRANSMISSION should be set to OFF in the MEASUREMENT menu
(see 

Measurement

 on Page 27).

Note:

 The Model Two can show spectrum data with absolute

measurements, or it can store data for comparative tests using the
TRANSMISSION feature.

Note:

 With Full Spectrum scan, all video carrier frequencies in the

selected Base Channel Plan (including those disabled for Channel Scan)
are scanned.

Summary of Contents for Two





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands