Model Two & Model Two Lite - Operation Manual
28
Single Frequency Setup
Press
F1
to enter the Single Frequency Setup menu. Use this menu to set the parameters for
the frequency display mode.
To select an item from the Single Frequency Setup menu, use
F2
or
F3
to scroll to the
selection.
FREQ TUNING STEP
- Select the meter’s internal step values by pressing
F1,
or press the
UP
and
DOWN
arrow keys. The steps can be either 10 MHz, 1 MHz, 100 kHz, 10 kHz, or by
Channel.
VOLUME
- Use the
UP
and
DOWN
arrow keys to set the volume of the meter’s internal
speaker. The volume may be set to one of 4 levels or OFF. Audio is heard when in the
Frequency mode.
SQUELCH
- Press
F1
to select or deselect the squelch operation. When squelch is activated,
the audio is muted when the Audio carrier level drops below –30 dBmV (+30 dB
μ
V).
PRIOR MENU
- Press
F1
to return to the previous menu.
