Model Two & Model Two Lite - Operation Manual
68
Press
F1
(START) to begin execution of the testing program. The Model Two immediately
performs the first sequence of tests. After each test time sequence is complete, an Auto Test
program status screen appears for a short time, then the Model Two shuts off.
If the Model Two is turned on during an Auto Test program, the program status screen appears
to indicate the Auto Test status. The program may be stopped by pressing
F1
(STOP).
A file containing all test records is created for each test time and automatically saved. The
filename is the Auto Test program name followed by an alphabetical assignment (beginning
with A) for each test time file to indicate they are 24HR Auto Test files. This is displayed in the
Model Two file directory along with the date and time. (See
File Saving, Viewing, and Printing
later in this chapter.)
Note:
If a Limit Test is part of a 24 HR Auto Test program, a 24 Hour
Video Deviation report (Rep_24) is also created and saved after the last
test sequence. This data record lists the maximum video deviation over
all time tests for each channel along with a Pass (P) or Fail (F) indication
for the channel based on the Limit Test parameter setup at the time the
Auto Test was performed.
