Model Two & Model Two Lite - Operation Manual
48
Display Limits
When Display Limits is set to Yes in the Scan Setup menu (see
Limit Setup
on Page 29), the
Channel Scan display shows the limit lines for the specified Minimum Video level and
Maximum Video level.
TIP:
While in the Channel Scan mode, you can use Fast Setup (press
SET
once) to go
directly to the Scan Setup parameters, including Marker type, Display Limits, and the Edit
Limits screen.
Limit Testing
The Model Two can quickly perform a test of the cable system to specified test limits with a single
key press. The selected User Channel Plan is tested to all enabled limit parameters as set in the
Edit Limits display from the Limit Setup menu. (See
Limit Setup
on Page 29.) To perform the
Limit Test, press
LIMIT
.
Channels are displayed momentarily as each channel is scanned. In addition, a progress bar
indicates the scan status.
