Model Two & Model Two Lite - Operation Manual
32
Use
F2
or
F3
to scroll through the list to the desired base plan. With the CATV cable
connected, press
F1,
and the Model Two searches for all active channels in your system. A
progress bar at the bottom of the screen indicates search progress.
Press
F1
to learn a channel plan. A prompt appears to instruct you to connect the CATV cable
to the Model Two. A list of 8 base Channel Plans is displayed.
Once the search is completed, the Model Two displays a prompt indicating the new Channel
Plan is being saved. This learned Channel Plan (for the selected User Plan) has all active
channels enabled . Those channels with levels less than -15 dBmV (45 dB
μ
V) are not enabled.
After learning a Channel Plan, the Model Two returns to the Level Measurement mode. You
may then modify the various parameters in the plan.
To return to the Channel Plan Setup menu to edit your User Plan, press
SET
twice to return to
the main Setup menu, use
F2
or
F3
to scroll to the Channel Plan selection, press
F1
(ENTER)
to display the Channel Plan menu and then use
F2
or
F3
to scroll to Edit User Plan.
Note:
If a Channel Plan is learned with less than 3 active channels found
(or the cable is not connected to the Model Two), all channels in the plan
are enabled.
