Model Two & Model Two Lite - Operation Manual
42
Single Frequency Channels
You can use the Model Two to measure a Single Frequency level over a specified bandwidth.
To do this, first set the Model Two’s channel type to SNGL or single frequency channel (see
Edit User Plan
on Page 33).
TIP:
While in Level mode, you can use Fast Setup to go directly to the setup parameters
for the current channel.
The level for the signal is displayed along with an F to indicate Single Frequency mode. Also
displayed are
Δ
FREQ and
Δ
AMP to indicate the distance and amplitude difference between
the center frequency and the highest peak of the signal in the bandwidth.
To scan the channel spectrum, press
LEVEL
again.
Note:
With a Single Frequency Channel, the Level (Live, Max,
Δ
p-p),
Scale, Reference, Auto, Marker, and
Δ
Marker may be used as
described for TV Channels.
