Model Two & Model Two Lite - Operation Manual
21
4.
Setup
4
When you first press
POWER ON/OFF
, the Model Two briefly displays the startup screen, then
displays the Level screen.
Before using the Model Two, you need to perform some setup procedures from the following
areas:
•
Information (general information about your Model Two and the status of user settings)
•
General (backlight time, contrast, shutdown time, temperature units, date & time, and print
setup)
•
Measurement (signal level units, single frequency setup, limit setup, transmission)
•
Channel Plan (select, learn, and edit the user plan, channel number display, tilt / favorite list)
2. Use
F2
and
F3
arrows to scroll through the main Setup menu.
3. When the desired command is highlighted, press
F1
(ENTER) to select the display.
To enter the setup display, do the following:
1. Press
SET
twice to display the main SETUP menu.
CAUTION:
The Model Two
battery may need charging prior to first use
(see
Battery Charging
on Page 20).
Note:
Model Two PC software may also be used to set up the Model
Two. See the Model Two Toolbox II manual for more information.
Note:
Pressing
SET
once activates the Fast Setup mode to display
setup parameters for the current mode. Pressing
SET
twice always
displays the main Setup menu. (See
Fast Setup
on Page 38.)
