Toyota Lexus IS300 Manual Download Page 168

Page: 168 / 389

COMFORT ADJUSTMENT

155

SV16118

Side seat position

1. Remove the head restraint.

SV16153a

2. Fix the child restraint system with the seat belt.

Latch the hook onto the anchor bracket and tighten the
top strap.

For instructions to install the child restraint system, see ”Child
restraint system” on page 140.

CAUTION

Make sure the top strap is securely latched, and
check that the child restraint system is securely by
pushing and pulling it in different directions.

Follow all the installation instructions provided by its
manufacturer.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Search results

Summary of Contents for Lexus IS300

Reviews:

Related manuals for Lexus IS300

Brands by name

Popular brands

Toyota Lexus IS300, Manual

Search results

Summary of Contents for Lexus IS300

Reviews:

Related manuals for Lexus IS300

Brands by name

Popular brands