manualshive.com logo in svg

Toyota Lexus IS300, Manual

The Toyota Lexus IS300 manual is a must-have for owners and enthusiasts alike. This comprehensive user manual provides detailed instructions and information about the luxurious IS300 model, allowing you to fully delve into its features and functionalities. Download your free manual from manualshive.com to unlock the full potential of your IS300 experience.

Share
Download
background image

STARTING AND DRIVING

249

The ”VSC” warning light and ”TRAC OFF” indicator/warning
light come on while driving without pushing ”TRAC OFF”
switch.

CAUTION

Do not rely excessively on the vehicle skid control
system.  Even if the vehicle skid control system is
operating, you must always drive carefully and atten-
tively to avoid serious injury.  Reckless driving will
result in an unexpected accident.  If the slip indicator
light flashes, sounding an alarm, special care should
be taken while driving.

Only use tires of specified size.  The size, manufac-
turer, brand and tread pattern for all 4 tires should be
the same.  If you use the tires other than specified, or
different type or size, the vehicle skid control system
may not function correctly.  When replacing the tires
or wheels, contact your Lexus dealer.

ELECTRONIC THROTTLE

CONTROL SYSTEM

The electronic throttle control system always maintains
appropriate engine output in relation to the accelerator
opening in all driving conditions.

SV31038

You can select the snow mode by pushing the ”SNOW”
switch.  The ”SNOW” indicator light will come on.

Snow mode: Decreases the engine output to minimize rear
wheel spinning on snowcovered or slippery roads.

To return to the normal mode, push the ”SNOW” switch again.
The ”SNOW” indicator light will go off.

When you turn the ignition switch off in the snow mode, the
mode automatically changes to the normal mode.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Reviews:

No comments

Related manuals for Lexus IS300

Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Brand: Saleen Pages: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Brand: Buick Pages: 5
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
EEZ RV 51 SC Instruction Manual preview
51 SC
Brand: EEZ RV Pages: 31
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Eaton Green Motion DC 66 User Manual preview
Green Motion DC 66
Brand: Eaton Pages: 18
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
aci ADARAC Aluminum M Series Installation Instructions Manual preview
ADARAC Aluminum M Series
Brand: aci Pages: 16
Imiola HAK-POL O/018 Quick Manual preview
O/018
Brand: Imiola HAK-POL Pages: 3
Magneti Marelli 350203061230 Installation Instruction preview
350203061230
Brand: Magneti Marelli Pages: 2
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
CrimeStopper CA-504.BRKT Install Manual preview
CA-504.BRKT
Brand: CrimeStopper Pages: 1
Safe Fleet PRIME DESIGN HXR-269-E-UM3-80 Manual preview
PRIME DESIGN HXR-269-E-UM3-80
Brand: Safe Fleet Pages: 12
Buick 1997 Skylark Owner'S Manual preview
1997 Skylark
Brand: Buick Pages: 371
Brodit ProClip 854399 Installation Instructions preview
ProClip 854399
Brand: Brodit Pages: 2

Brands by name

Popular brands

Load more brands