manualshive.com logo in svg

Toyota Lexus IS300, Manual

The Toyota Lexus IS300 manual is a must-have for owners and enthusiasts alike. This comprehensive user manual provides detailed instructions and information about the luxurious IS300 model, allowing you to fully delve into its features and functionalities. Download your free manual from manualshive.com to unlock the full potential of your IS300 experience.

Share
Download
background image

INTRODUCTION

303

NOTICE

Remember that battery and ignition cables carry high
currents or voltages.  Be careful of accidentally
causing a short circuit.

Before closing the engine hood, check to see that you
have not forgotten any tools, rags, etc.

Do not drive with the air cleaner removed, or
excessive engine wear could result.  Also backfiring
could cause a fire in the engine compartment.

Do not overfill automatic transmission fluid, or the
transmission could be damaged.

Be careful not to scratch the glass surface with the
wiper frame.

PARTS AND TOOLS

Here is a list of parts and tools you will need to perform
do–it–yourself maintenance.  Remember all Lexus parts are
designed in metric sizes, so your tools must be metric.

CHECKING THE ENGINE OIL LEVEL

Parts (if level is low):

”Toyota Genuine Motor Oil” or equivalent 
Oil grade: API grade SL ”Energy–Conserving” or ILSAC
multigrade engine oil.  For recommended oil viscosity, see
page 317.

Tools:

Rag or paper towel

Funnel (only for adding oil)

CHECKING THE ENGINE COOLANT LEVEL

Parts (if level is low):

”Toyota Genuine Long Life Coolant” or equivalent
See ”Checking the engine coolant level” on page 319 for
instructions.

Demineralized or distilled water

Tools:

Funnel (only for adding coolant)

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Reviews:

No comments

Related manuals for Lexus IS300

AC Schnitzer F40 Fitting Instructions Manual preview
F40
Brand: AC Schnitzer Pages: 16
Hama Pico Operating Instructions preview
Pico
Brand: Hama Pages: 2
GMC 2005 Sierra Denali Owner'S Manual preview
2005 Sierra Denali
Brand: GMC Pages: 428
Mercedes-Benz GLA 250 2019 Operator'S Manual preview
GLA 250 2019
Brand: Mercedes-Benz Pages: 346
Thule Kit 1514 Instructions preview
Kit 1514
Brand: Thule Pages: 4
Waeco MagicWatch MWE250 Installation And Operating Manual preview
MagicWatch MWE250
Brand: Waeco Pages: 172
Raptor Series MAGNUM RT Series Manual preview
MAGNUM RT Series
Brand: Raptor Series Pages: 6
Skoda OCTAVIA - TECHNICAL CHANGES 11-2009 Owner'S Manual Supplement preview
OCTAVIA - TECHNICAL CHANGES 11-2009
Brand: Skoda Pages: 16
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20
Brodit ProClip 854676 Quick Start Manual preview
ProClip 854676
Brand: Brodit Pages: 2
Skoda FABIA II TMB PS 035 Mounting And User Instructions preview
FABIA II TMB PS 035
Brand: Skoda Pages: 16
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
Dodge 2004 JR41 Stratus Sedan Owner'S Manual preview
2004 JR41 Stratus Sedan
Brand: Dodge Pages: 273
Istar PI00670 Instruction Manual preview
PI00670
Brand: Istar Pages: 6
Metra Electronics 99-7804 Installation Instructions Manual preview
99-7804
Brand: Metra Electronics Pages: 10
Honda Vezel Owner'S Manual preview
Vezel
Brand: Honda Pages: 279

Brands by name

Popular brands

Load more brands