manualshive.com logo in svg

Toyota Lexus IS300, Manual

The Toyota Lexus IS300 manual is a must-have for owners and enthusiasts alike. This comprehensive user manual provides detailed instructions and information about the luxurious IS300 model, allowing you to fully delve into its features and functionalities. Download your free manual from manualshive.com to unlock the full potential of your IS300 experience.

Share
Download
background image

CHASSIS

335

CHECKING AND REPLACING TIRES

When to replace your tires

SV63006

 1

New tread    2 Tread wear indicator

 3

Worn tread

Replace the tires when the tread wear indicators show.
The location of the tread wear indicators is shown by the
”TWI” or ”

∆

” marks molded on the sidewall of each tire.

The tires on your Lexus have built–in tread wear indicators to
help you know when the tires need replacement.  When the
tread depth wears to 1.6 mm (0.06 in.) or less, the indicators
will appear.  If you can see the indicators in two or more
adjacent grooves, the tire should be replaced.

Vehicles equipped with 215/45ZR17 or 225/45ZR17 tires:
Your Lexus has been fitted with specially developed tires which
provide exceptional dynamic performance under general road
conditions.  However your riding comfort may worsen a little
and road noise may increase during driving.  You may also
notice that your tires will wear more rapidly and tire grip
performance will be reduced on the snowy and/or icy roads
when compared to standard tires.  Be sure to have snow tires
or tire chains on the snowy and/or icy roads and drive carefully
with the speed appropriate for road conditions.

NOTICE

Low profile tire like 215/45ZR17 or 225/45ZR17 may have
greater damage than usual tires to its tire wheel when
receiving impact from the road surface.  Therefore, pay
attention to the followings.

Be sure to use with proper tire pressure. If the tire
pressure is low, the tire may have a greater damage.
For detailed information about tire pressure, see
page 326 or 327.

Avoid driving onto high, sharp–edged objects and
other road hazards.  Failure to do so can lead to
severe tire damage.

The effectiveness of snow tires is lost if the tread wears
down below 4 mm (0.16 in.).

If you have tire damage such as cuts, splits, cracks deep
enough to expose the fabric, or bulges indicating internal
damage, the tire should be replaced.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Reviews:

No comments

Related manuals for Lexus IS300

GMC HUMMER EV 2022 Manual preview
HUMMER EV 2022
Brand: GMC Pages: 140
Cadillac ESCALADE - BROCHURE 2009 Personalization Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 24
Cadillac Escalade Personalization Manual preview
Escalade
Brand: Cadillac Pages: 20
Cadillac Escalade 2016 Convenience/Personalization Manual preview
Escalade 2016
Brand: Cadillac Pages: 20
Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
Cadillac 1997 Catera Owner Assistance Information preview
1997 Catera
Brand: Cadillac Pages: 34
Toro 137-1019 Installation Instructions Manual preview
137-1019
Brand: Toro Pages: 24
Thule 953000 Instructions Manual preview
953000
Brand: Thule Pages: 8
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
Oldsmobile Bravada 1997 Owner'S Manual preview
Bravada 1997
Brand: Oldsmobile Pages: 358
Dakota Digital CRS-3000-3 Manual preview
CRS-3000-3
Brand: Dakota Digital Pages: 20
ORA XL MIRROR Installation Instructions Manual preview
XL MIRROR
Brand: ORA Pages: 7
Cadillac 2000 DeVille Service Manual Addendum preview
2000 DeVille
Brand: Cadillac Pages: 19

Brands by name

Popular brands

Load more brands