manualshive.com logo in svg

Toyota Lexus IS300, Manual

The Toyota Lexus IS300 manual is a must-have for owners and enthusiasts alike. This comprehensive user manual provides detailed instructions and information about the luxurious IS300 model, allowing you to fully delve into its features and functionalities. Download your free manual from manualshive.com to unlock the full potential of your IS300 experience.

Share
Download
background image

BODY

370

RAIN CLEARING MIRRORS

The rear view mirrors have been coated to produce a ”rain
clearing” effect.  This coating causes the raindrops to
spread, clearing the driver’s rear view when it rains.

It is sufficient to wash the mirrors with water for day to day care.

The rain clearing effect is reduced in drizzle and light rain.

In the following cases, the rain clearing effect will be reduced
temporarily, but will gradually recover.

After wiping dirt off the mirrors

When the mirrors fog up

After waxing your vehicle in an automatic car wash

After your vehicle has been parked for a long period in
underground parking lots, etc. where there is no direct
sunlight.

If you would like to restore the rain clearing effect to its normal
level immediately in the above cases, wash the mirrors with
neutral detergent, then rinse thoroughly.

NOTICE

To maintain the rain clearing ability, and prevent the
mirrors from being scratched, observe the following
precautions.

Do not use any glass cleaners that contain
compounds.

If ice should jam the mirror, do not scrape the mirror.
Use a spray deicer to free the mirror.

Wash off any wax stuck to the mirrors with neutral
detergent and rinse thoroughly as any wax on the
surface of the mirrors can cause the rain clearing
effect to be lost.

Do not use any water repellents as they can destroy
the rain clearing effect.  If any repellent gets stuck on
the surface of the mirrors, wash it off with neutral
detergent, then rinse thoroughly.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Reviews:

No comments

Related manuals for Lexus IS300

TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
Camoplast Polaris TATOU 4S Installation Manuallines preview
Polaris TATOU 4S
Brand: Camoplast Pages: 13
Volvo 1996 960 Quick Tips preview
1996 960
Brand: Volvo Pages: 10
N-Com Bluetooth Kit3 PLUS User Instructions And Safety preview
Bluetooth Kit3 PLUS
Brand: N-Com Pages: 36
Prorack K349 Fitting Instructions Manual preview
K349
Brand: Prorack Pages: 13
Subaru S0A367010 Installation Instructions preview
S0A367010
Brand: Subaru Pages: 2
Menabo ANTARES KIT+1 Assembly & Instruction Manual preview
ANTARES KIT+1
Brand: Menabo Pages: 8
Seat Arona 2018 Owner'S Manual preview
Arona 2018
Brand: Seat Pages: 372
ACV 381190-37-1 Installation Manual preview
381190-37-1
Brand: ACV Pages: 2
EZ-ON 100SMU Quick Start Manual preview
100SMU
Brand: EZ-ON Pages: 2
Yakima K1095 Instructions Manual preview
K1095
Brand: Yakima Pages: 12
Hyundai Sonata 2011 Owner'S Manual preview
Sonata 2011
Brand: Hyundai Pages: 380
Mitsubishi Montero 1987 Service Manual preview
Montero 1987
Brand: Mitsubishi Pages: 284
VDO FUEL TANK GAUGE Installation Instructions Manual preview
FUEL TANK GAUGE
Brand: VDO Pages: 10
Pinnacle EPL7SAM+C Series Quick Start Manual preview
EPL7SAM+C Series
Brand: Pinnacle Pages: 2
Suzuki Alto800 Manual preview
Alto800
Brand: Suzuki Pages: 190
Cramaro FARP WORKS CRUSHED CAR Manual preview
FARP WORKS CRUSHED CAR
Brand: Cramaro Pages: 8
BFT ESPAS10 MONEYBOX Installation And User Manual preview
ESPAS10 MONEYBOX
Brand: BFT Pages: 26

Brands by name

Popular brands

Load more brands