Toyota Lexus IS300 Manual Download Page 95

Page: 95 / 389

EXTERIOR EQUIPMENT

HOOD

SS15001

1. To open the hood, pull the hood lock release lever
under the instrument panel. The hood will spring up
slightly.

SV15010

2. Insert your fingers under the hood, push up the
auxiliary catch lever and lift the hood.

SV15002

3. Hold the hood open by inserting the support rod into
the slot.

CAUTION

After inserting the support rod into the slot, make sure
the rod supports the hood securely from falling down on
to your head or body.

NOTICE

Be sure to return the support rod to its clip before
closing the hood. Closing the hood with the support rod
up could cause the hood to bend.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Search results

Summary of Contents for Lexus IS300

Reviews:

Related manuals for Lexus IS300

Brands by name

Popular brands

Toyota Lexus IS300, Manual

Search results

Summary of Contents for Lexus IS300

Reviews:

Related manuals for Lexus IS300

Brands by name

Popular brands