manualshive.com logo in svg

Toyota Lexus IS300, Manual

The Toyota Lexus IS300 manual is a must-have for owners and enthusiasts alike. This comprehensive user manual provides detailed instructions and information about the luxurious IS300 model, allowing you to fully delve into its features and functionalities. Download your free manual from manualshive.com to unlock the full potential of your IS300 experience.

Share
Download
background image

COMFORT ADJUSTMENT

123

SV16061

This indicator comes on when the ignition key is turned to
the ”ACC” or ”ON” position.  It goes off after about 6
seconds.  This means the front seat belt pretensioners are
operating properly.

The warning light system monitors the airbag sensor
assembly, front airbag sensors, side and curtain shield airbag
sensors, front seat belt pretensioner assemblies, inflators,
warning light, interconnecting wiring and power sources.  (For
details, see ”Service reminder indicators and warning buzzers”
on page 44.)

SV16068

 1

SRS warning light

 2

Front seat belt pretensioner assemblies

 3

Airbag sensor assembly

 4

Front airbag sensors

The front seat belt pretensioner system consists mainly of the
above components and their locations are shown in the
illustration.

The front seat belt pretensioners are controlled by the airbag
sensor assembly. The airbag sensor assembly consists of a
safing sensor and airbag sensor.

When the front seat belt pretensioners are activated, an
operating noise may be heard and a small amount of
smoke–like gas may be released. This gas is harmless and
does not indicate that a fire is occurring.

Once the front seat belt pretensioners have been activated, the
seat belt retractors remain locked.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Reviews:

No comments

Related manuals for Lexus IS300

Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50
Jeep Grand Cherokee SRT 2014 Owner'S Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 118
Jeep 2014 Grand Cherokee Accessories Quick Reference Manual preview
2014 Grand Cherokee
Brand: Jeep Pages: 24
Jeep Grand Cherokee Specfications preview
Grand Cherokee
Brand: Jeep Pages: 8

Brands by name

Popular brands

Load more brands