manualshive.com logo in svg

Toyota Lexus IS300, Manual

The Toyota Lexus IS300 manual is a must-have for owners and enthusiasts alike. This comprehensive user manual provides detailed instructions and information about the luxurious IS300 model, allowing you to fully delve into its features and functionalities. Download your free manual from manualshive.com to unlock the full potential of your IS300 experience.

Share
Download
background image

MAINTENANCE

294

Tire rotation

Rotate the tires according to the maintenance schedule.  (For
scheduled maintenance information, please refer to the
“Owner’s Manual Supplement” or “Scheduled Maintenance”.)
See page 333 for additional information.

Fluid leaks

Check underneath for leaking fuel, oil, water or other fluid after
the vehicle has been parked for a while.  If you smell fuel fumes
or notice any leak, have the cause found and corrected
immediately.

Doors and engine hood

Check that all doors, including trunk lid or back door, operate
smoothly and all latches lock securely.  Make sure the engine
hood secondary latch secures the hood when the primary latch
is released.

Vehicle interior

Items listed below should be checked regularly, e.g. while
performing periodic services, cleaning the vehicle, etc.

Lights

Make sure the headlight, stop lights, tail lights, turn signal
lights, and other lights are working.  Check headlight aim.

Service reminder indicators and warning buzzers

Check that all service reminder indicators and warning
buzzers function properly.

Steering wheel

Check that it has the specified free play.  Be alert for changes
in steering condition, such as hard steering, excessive free
play or strange noise.

Seats

Check that all front seat controls such as seat adjusters,
seatback recliner, etc. operate smoothly.  Check that the head
restraints move up and down smoothly and that the locks hold
securely in any latched position. For folding–down rear
seatbacks, check that the latches lock securely.

Seat belts

Check that the seat belt system such as buckles, retractors
and anchors operate properly and smoothly.  Make sure the
belt webbing is not cut, frayed, worn or damaged.

Accelerator pedal

Check the pedal for smooth operation and uneven pedal effort
or catching.

Clutch pedal

Check the pedal for smooth operation.

Brake pedal

Check the pedal for smooth operation and the proper
clearance and free play.  Check the brake booster function.

Brakes

At a safe place, check that the brakes do not pull to one side
when applied.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Reviews:

No comments

Related manuals for Lexus IS300

Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Brand: Yakima Pages: 8
Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
Kolpin 25-9250 Owner'S And Operator'S Manual preview
25-9250
Brand: Kolpin Pages: 25
DAVIS 8126GD User Manual preview
8126GD
Brand: DAVIS Pages: 32
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
Atera 022 681 Manual preview
022 681
Brand: Atera Pages: 10
RAM 4500 CHASSIS CAB 2012 Specification preview
4500 CHASSIS CAB 2012
Brand: RAM Pages: 7
BMW E46/2 Coupe Manual preview
E46/2 Coupe
Brand: BMW Pages: 55
Whispbar K496W Fitting Instructions Manual preview
K496W
Brand: Whispbar Pages: 15
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Brand: Dodge Pages: 276
INDIWORK A-LINK2-NTG5 Instruction Manual preview
A-LINK2-NTG5
Brand: INDIWORK Pages: 18
Opel CORSA 2020 Infotainment Manual preview
CORSA 2020
Brand: Opel Pages: 103
Pontiac 2006 Relay Getting To Know Manual preview
2006 Relay
Brand: Pontiac Pages: 20
Grillo PK 1400 Operator'S Manual preview
PK 1400
Brand: Grillo Pages: 71
Ford 2003 Mustang Workshop Manual preview
2003 Mustang
Brand: Ford Pages: 4378
Toyota 2013 Prius c Owner'S Manual preview
2013 Prius c
Brand: Toyota Pages: 549

Brands by name

Popular brands

Load more brands