Toyota Lexus IS300 Manual Download Page 83

Page: 83 / 389

INTERIOR EQUIPMENT

WARNING REFLECTOR HOLDER

Sedan

SS14092

To loosen 2 To tighten

This belt is designed to hold the warning reflector.

To loosen: Pull the buckle forward.

To tighten: Pull on the belt.

Although the warning reflector itself is not included as an
original equipment, this belt can be used to store the warning
reflector.

Make sure the warning reflector is securely held.

SportCross

SV14040

The warning reflector is in the auxiliary box.

Although the warning reflector itself is not included as an
original equipment, this auxiliary box can be used to store the
warning reflector.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Search results

Summary of Contents for Lexus IS300

Reviews:

Related manuals for Lexus IS300

Brands by name

Popular brands

Toyota Lexus IS300, Manual

Search results

Summary of Contents for Lexus IS300

Reviews:

Related manuals for Lexus IS300

Brands by name

Popular brands