Toyota 02-8FDF15, Operator'S Manual

Page: 26 / 392

en
en-25
(1) Forward
(2) Backward
Mini lever (Option)
Control lever
Lever for shifting between forward and
reverse.
Forward .................................... Push forward
Reverse ..................................... Pull backward
The speed of forward and backward traveling
can be adjusted by the extent of pressing the
accelerator pedal.
Note:
• Stop the vehicle before shifting between
forward and backward traveling.
• After the OPS System has been activated,
return the accelerator pedal and control
lever to their neutral positions and return to
the seat before recommencing operations.
• Always operate the control lever from a
properly seated position.
• Depending on the vehicle specifications,
the position of the control lever may vary.
(1) Lower
(2) Raise
Lift lever
Raise and lower the forks for loading.
Raise ..........................................Pull backward
Lower ......................................... Push forward
Raising speed can be adjusted by the extent of
pressing the accelerator pedal and pulling the
lift lever.
Lowering speed can be adjusted by the extent
of pushing the lift lever.
Note:
• After the OPS System has been activated,
return the accelerator pedal and all of the
levers to their neutral positions and return
to the seat before recommencing opera-
tions.
• If you return to the seat while lowering the
lift lever, the forks will not descend due to
the return to neutral function.
• Always operate the lift lever from a prop-
erly seated position.
(1)
(2)
(1)
(2)
(1) Lift lock release bolt
Note:
• If you use the idling lifting speed increase
function (Option), pulling the lift lever will
automatically increase the engine speed
and raise the forks at a constant speed with-
out having to step on the accelerator pedal.
• When the ignition switch is turned to OFF,
the forks will not descend even if the lift
lever is lowered. (Key-lift interlock)
• When the forks will not lower due to sys-
tem malfunction or other reasons, they can
be lowered by opening the lift lock release
bolt.
• If you lower the forks by opening the lift
lock release bolt, close and lock the bolt.
(1) Forward
(2) Backward
Tilt lever
Tilt the mast forward and backward.
Forward ..................................... Push forward
Backward ..................................Pull backward
Forward or backward tilting speed can be
adjusted by the extent of pressing the accelera-
tor pedal and operating the lever.
Note:
• After the OPS System has been activated,
return the accelerator pedal and all of the
levers to their neutral positions and return
to the seat before recommencing opera-
tions.
• Always operate the tilt lever from a prop-
erly seated position.
(1)
(2)
(1)
01_A5028-0EA04_En.fm 25 ページ ２０１２年１２月６日 木曜日 午後１２時４２分