Toshiba Strata DK 24, Installation And Maintenance Manual

Page: 350 / 372

REMOTE ADMINISTRATION & MAINTENANCE PROCEDURES
SECTION 400-096-600
SEPTEMBER 1992
-46-
To store data, press CR .
Continue returning to Step 3 until all data is recorded for this
program.
To exit this program, press
# # CR .
TABLE RM-AT
PROGRAM 48
STATION TOLL RESTRICTION CLASSIFICATION
ACTION STEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter the Program Mode
At the >MODE prompt, enter
P R O G CR .
2
P 48
P48
Enter Program Number 48
3
P48 0 0
Refer to the System Record Sheet and enter the required port
number.
Example: Port 00, enter
0 0 .
Press CR .
4 Press # key. The system will display the present data as a
2-digit code: The first digit designates digit free or digit restrict.
The second digit is the station restriction code. Refer to the
System Record Sheet and change if required.
P48 0 0 # 13
5 To Exit Program/Store Data
P48 0 0 # 13
P48 # #
P
A)
B)
C)
To store data, press CR .
To exit this program, press # # CR .
TABLE RM-AU
PROGRAM 50-1
LCR PARAMETERS
ACTION STEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter
P R O G CR .
2
P 50
P50
Enter Program Number 50.
3
P50 1 01 N
Enter 1 . Refer to the System Record Sheet and enter the required
button/LED number.
Example: Button 01, enter
0 1 .
Press CR .
4 Refer to the System Record Sheet and change button/LED status,
if required.
Press
SPACE to move to next button/LED.
P50 1 01 N
02 N
5 To Exit Program/Store Data
P50 1 01 N
02 N
P50 # #
P
A)
B)