Toshiba Strata DK 24, Installation And Maintenance Manual

Page: 306 / 372

-2-
REMOTE ADMINISTRATION & MAINTENANCE PROCEDURES
SECTION 400-096-600
SEPTEMBER 1992
2 GENERAL DESCRIPTION
2.01 Remote Administration and Maintenance
is accomplished with a remote terminal/modem
communicating over the public telephone net-
work via either an external modem (connected to
a dedicated CO line or a standard telephone
port) or a modem unit (IMDU) installed on a PIOU
or PIOUS PCB. See Figure 1.
Program Mode: Provides for complete program-
ming of all STRATA DK programs (including
speed dial adds/changes).
Test Mode: Provides for testing of STRATA DK
stations and CO lines.
Data Dump Mode: Provides a complete printout of
all or individual STRATA DK customer data base
programs, including speed dial numbers and
LCD messages.
Message Mode: Provides for sending, adding, or
changing digital and electronic telephone LCD
messages.
Speed Dial Mode: Allows station and system
speed dial numbers to be programmed remotely.
NOTE:
All the functions in the preceding paragraphs
are also available via a terminal connected
directly to the on-site PIOU(S) PCB or a termi-
nal with a modem connected to a PSTU port
(Paragraph 5).
2.05 There are two levels of Remote Administra-
tion and Maintenance.
Level 1: Allows access to all programs.
Level 2: Allows access to Programs 30 ~ 39 and
77 ~ 89, which pertain only to individual station
options such as button assignments, class of
service, etc.
2.06 Each Remote Administration and Mainte-
nance level has a different programmable pass-
word for customer data base protection. This al-
lows a customer to make certain station moves,
adds, and changes in Level 2; while protecting the
critical system assignments in Level 1 (refer to
Program 00).
3 HARDWARE REQUIREMENTS
3.01 The STRATA DK must be configured with
either an IMDU-equipped PIOU or PIOUS or an
external modem connected to a dedicated CO line
or standard telephone circuit.
2.02 If using an external modem, the modem may
be connected as detailed in the Installation Sec-
tion, 400-096-208.
2.03 Remote Administration and Maintenance calls
may connect to the IMDU automatically via pro-
grammable CO line ringing assignments (Pro-
gram 78), or manually via the standard call transfer
feature at intercom number 19. Automatic connec-
tion allows remote programming to be accom-
plished after business hours without on-site assis-
tance via night ringing assignments.
2.04 Remote Administration and Maintenance al-
lows the following functions to be accomplished
remotely:
REMOTE
TERMINAL
MODEM
PUBLIC
TELEPHONE
NETWORK
KSU
(300 or 1200 BPS)
RS-232
CO LINE
CO LINE
CO LINE
CIRCUIT
MODEM
PIOU
or
PIOUS
INTERNAL MODEM (IMDU)
Instead of an IMDU-equipped PIOU or
PIOUS, an external modem
connected to either a dedicated
CO line circuit or standard
telephone port can
be used for Remote Administration
and Maintenance.
T S100
FIGURE 1
PIOUS/IMDU CIRCUIT DIAGRAM