System Configuration Setup
Dual BIOS Utility
89
The following window displays when you start the Dual BIOS Utility.
Sample settings screen
Dual BIOS Utility keyboard commands
❖
Boot From - Designates the startup BIOS.
❖
Main ROM Type - Indicates the ROM type where the Main BIOS is stored.
❖
Backup ROM Type - Indicates the ROM type where the Backup BIOS is stored.
❖
Wide Range Protection - Do not change this setting.
❖
Boot From - Specifies the startup BIOS.
❖
Auto Recovery - If a checksum error occurs in the Main BIOS or Backup BIOS, the
active BIOS automatically corrects the checksum. (If you set the ACPI Suspend Type
option to "Suspend to RAM" in the BIOS Setup Utility’s Power Management Setup
window, the Auto Recovery option also is automatically set to "Enabled.")
❖
Halt On Error - If an error occurs in the BIOS when this option is set to "Enabled," the
startup procedure is suspended temporarily and a message displays, prompting you
to take further action.
❖
Copy Main ROM Data to Backup - Determines how to display a backup message.
This option is set automatically and cannot be changed.
HINT: The settings shown are the recommended values.
<
↑
>
Moves the cursor to the previous item.
<
↓
>
Moves the cursor to the next item.
< PgDn/PgUp >
Changes settings.
< Esc >
Resets the server.
<F10>
Turns off the server.
AMI Dual BIOS Flash ROM Programming Utility
Boot From.......................Main BIOS
Main ROM Type...................SST 39SF020
Backup ROM Type.................SST 39SF020
Wide Range Protection Disable
Boot From Main BIOS
Auto Recovery Enable
Halt On Error Disable
Copy Main ROM Data to Backup
Load Default Settings
Save Settings to CMOS
PgDn/PgUp:Modify
↑↓
:Move
ESC:Reset
F10:Power Off
