148
5
Using "Standard CMOS Setup" in the Setup menu, set the system date and time.
6
Using "BIOS Features Setup" in the Setup menu, change setting as specified below:
S.M.A.R.T. for Hard Disks: Enabled
7
Using "Chipset Features Setup
"
in the Setup menu, change settings as specified
below:
SDRAM Timing by SPD: Enabled
DRAM Integrity Mode: Ecc
USB Controller: USB Port 0&1
8
If Windows 2000 Server is installed, change the following setting using "PNP/PCI
Configuration" in the Setup menu:
Plug and Play Aware O/S: Yes