Timewave DSP-232, Operating Manual

Page: 47 / 271

Chapter 4 Terminal Interfacing
With EXPERT OFF, expert-level commands may not be accessed and don’t appear in any output of the DISPLAY
command--an attempt to use one of these commands will result in the error message “
?EXPERT command .”
All mmediate commands (e.g., CONNECT and PACKET) are ‘NOVICE’ commands. The error message for an
Expert command is separate from the unknown command message:
cmd: BBQ
?What?
cmd: FRICK
?EXPERT command
In Host mode, all commands are available, regardless of the setting of EXPERT. This command won’t affect
operation of AEA PakRatt programs.
The following display lists denote when a command is available when EXPERT of OFF (“Novice”). “Retain”
means the command keeps its setting during a REINIT operation.
cmd:DISPLAY A
8Bitconv Novice Retain
ACRDisp
AFilter
ALFDisp
AUTOBaud
AWlen Novice
Retain
BBSmsgs
CASedisp
DCdconn
Echo
EScape
Flow
ILfpack
NUCr
NULf
NULLs
PARity Novice
Retain
TBaud Novice Retain
TRFlow
TXFlow
XFlow
cmd:DISPLAY B
3Rdparty Novice Retain
FREe
Retain
KILONFWD Retain
LAstmsg Retain
MAildrop Novice Retain
MDMon Novice
Retain
MDPrompt Novice Retain
MMsg Novice
Retain
MTExt Novice Retain
MYMail Novice Retain
TMail Novice Retain
TMPrompt Novice Retain
cmd:DISPLAY C
BKondel
CANline
CANPac
CHCall
CHDouble
CHSwitch Novice
COMmand
CWid
DELete
ERrchar
HEReis
PASs
PTOver Novice
RECeive
REDispla
SEndpac
STArt
STOp
TIme
XOff
XON
cmd: DISPLAY F
ASPect Novice
FAXNeg
FSpeed Novice
GRaphics Novice
LEftrite
PRCon Novice
PRFax
PROut
PRType Novice
cmd: DISPLAY I
Unproto Novice Retain
AAb Novice
Retain
Beacon
BText
Retain
CBell Retain
CMSg Novice
4-14 September, 05