Thermo Scientific VF-F20-A, Operating Manual

Page: 197 / 240

7
•
Maintenance and Service
Integral Fraction Collector FT (VF-F20-A) Operating Manual Page 197
7.18 Slide-In Module
CAUTION — Heavy Load, Bulky device
The device is too heavy or bulky for one person alone to handle safely.
To avoid personal injury or damage to the device, observe the following
guidelines:
•
Physical handling of the device, including lifting or moving, requires a
team effort of two persons.
•
A team effort is in particular required when lifting the device into the
system stack or when removing it.
7.18.1 Removing the Slide-In Module
Tools required
Screwdriver, Torx T20
Preparations
Prepare the device for transport. See the Transporting or Shipping the
device section in this operating manual.
Follow these steps
1. Loosen the four captive screws on the front left and front right of
the device.
Figure 85: Captive screws on the slide-in module