manualshive.com logo in svg

Thermo Scientific VF-F20-A, Operating Manual

The Thermo Scientific VF-F20-A Operating Manual is an essential resource for users of this advanced product. Easily accessible for free download from manualshive.com, this comprehensive manual provides detailed instructions, enabling optimal utilization of the VF-F20-A. Accessing the manual ensures maximum efficiency and effective operation of this exceptional device.

Share
Download
background image

5   

•

 

  Installation 

Page 60 

Integral Fraction Collector FT (VF-F20-A) Operating Manual 

5.3.2

 

Power Cord 

The power cords are designed to match the wall socket requirements of 
the country in which they are used. The end of the power cords that 
plugs into the power socket on the device is identical for all power cords. 
The end of the power cords that plugs into the wall socket is different. 

 

WARNING

—

Electric Shock or Damage to the device 

Never use a power cord other than the power cords provided by Thermo 
Fisher Scientific for the device. 

•

 

Only use a power cord that is designed for the country in which you 
use the device. 

•

 

Do not use extensions cords. 

•

 

Never plug the power cord to a power socket that is shared with 
other equipment (for example, multiple sockets). 

•

 

Operate the device only from a power outlet that has a protective 
ground connection. 

•

 

In case of emergency, it must be possible to reach the power cord 
easily at any time to disconnect the device from the power line. 

 

 

WARNING

—

Electric Shock or Damage to a Product 

Misuse of the power cords could cause personal injury or damage the 
instrument. Use the power cords provided by Thermo Fisher Scientific 
only for the purpose for which they are intended. Do not use them for 
any other purpose, for example, for connecting other instruments. 

 

 

Summary of Contents for VF-F20-A

















































































































































































































































Reviews:

No comments

Related manuals for VF-F20-A

ACS 3200 Series Operation And Instruction Manual preview
3200 Series
Brand: ACS Pages: 56
NEC MD462OR Quick Reference Manual preview
MD462OR
Brand: NEC Pages: 44
Radarcan R-106 User Manual preview
R-106
Brand: Radarcan Pages: 40
Nautilus 9NP-B7524 Series Owner'S Instructions preview
9NP-B7524 Series
Brand: Nautilus Pages: 2
Nautilus Be strong NS 700X Owner'S Manual preview
Be strong NS 700X
Brand: Nautilus Pages: 34
Nautilus BE STRONG E916 Quick Start Manual preview
BE STRONG E916
Brand: Nautilus Pages: 21
olympia electronics GR-940/15L Quick Start Manual preview
GR-940/15L
Brand: olympia electronics Pages: 4
Makita WA400MP Instruction Manual preview
WA400MP
Brand: Makita Pages: 208
GE 9100c Technical Reference Manual preview
9100c
Brand: GE Pages: 241
GE AMX-II Service Manual preview
AMX-II
Brand: GE Pages: 223
Kannad INTEGRA ARINC e-NAV Installation & Operation Manual preview
INTEGRA ARINC e-NAV
Brand: Kannad Pages: 20
DC Med IFU-1701 Instructions For Use preview
IFU-1701
Brand: DC Med Pages: 2
HydroHoist HydroPort EPIC Installation Manual preview
HydroPort EPIC
Brand: HydroHoist Pages: 19
DGH TECHNOLOGY Scanmate-B DGH 8000 Operator'S Manual preview
Scanmate-B DGH 8000
Brand: DGH TECHNOLOGY Pages: 53
Monosem Wingfold User Manual preview
Wingfold
Brand: Monosem Pages: 104
Stahls Thermo-GRIP Instructions For Using preview
Thermo-GRIP
Brand: Stahls Pages: 2
Alaris Medical Systems Signature IVAC 710 Series Technical & Service Manual preview
Signature IVAC 710 Series
Brand: Alaris Medical Systems Pages: 140
Beckhoff AX2090-ND80 Series Manual preview
AX2090-ND80 Series
Brand: Beckhoff Pages: 41

Brands by name

Popular brands

Load more brands